Is
there a list of the .ini settings for the SmarTeam Viewer for viewing Pro/E
files?
Here is a list of all the .ini settings for the
SmarTeam Viewer for viewing Pro/E files.
These settings are set in the [Options] section in the avx.ini file which is
located in the C:\WINDOWS directory.
-----
ProE2DLoadPicture=<0|1>
Set to 1 to load the preview data for
Pro/ENGINEER 2D Drawings.
If preview does not exist, the 2D drawing will be generated from the 3D Model.
Default value: 0
-----
ProE2DLoadSavedDisplayLists=<0|1>
Set to 1 to load the display list instead of
generating the 2D drawing from the 3D Model. Option applies to Pro/ENGINEER 2D
files. If the display list does not exist, the 2D drawing will be generated
from the 3D Model.
Default value: 1
-----
ProE2DTanEdgeDefaultStyle=<0-4>
Specifies the default line style for tangent
edges if it is not saved in the native file. The styles are:
0 - Solid
1 - Disabled
2 - Control
3 - Phantom
4 - Dimmed
Default value: 0
-----
ProE2DViewDefaultStyle=<HIDDEN|WIREFRAME|SHADING|NO
HIDDEN>
Specifies a default style to display 3D
projected views:
• HIDDEN
• WIREFRAME
• SHADING
• NO HIDDEN
Default value: NO HIDDEN
-----
ProEIntegration=<0|1>
Set to 1 to enable requests to be sent to the
Render Engine for Pro/ENGINEER.
Default value: 0
-----
ProELang=<native font>
Specifies the native font to use for
Pro/ENGINEER 2D drawings.
Possible values are:
Korean/Japanese/Chinese_cn/Chinese_tw/Hebrew/Russian
Example:
ProELang = Chinese_cn
Font files to use should be defined in the proefont.map
file located in the avwin\font subdirectory in the AutoVue installation
directory.
Refer to proefont.map for more instructions
regarding font mapping.
-----
ProELoadCosmetics=<0|1>
Set to 0 to turn off display of datum cosmetics
(coordinate system, datum planes and datum axes and datum points).
Default value: 1
-----
ProELoadCosmeticWires=<0|1>
Set to 0 to turn off display of cosmetic wires.
Default value: 1
-----
ProELoadPMIData=<0|1>
Set to 0 to disable display of PMI entities.
Default value: 1
-----
ProEMassPropUseMesh=<0|1>
Set to 1 to compute mass properties (volume,
surface area, mass,...) using the mesh model.
Set to 0 to compute mass properties using the
BRep model.
Default value: 0
-----
ProEPMIDIMTOLDisplay=<0/1>
Set to 1 to display tolerance for dimension
entities for Pro/ENGINEER 3D files.
Default value: 1
-----
ProEShowHiddenLineDashed=<0|1>
This option controls the display and printing of
hidden lines contained in Pro/ENGINEER drawings.
Set to 1 to display and print hidden lines as dashed
lines.
Set to 0 to display and print hidden lines as
solid lines.
Default value: 0
-----